Send a Rain Video With the Storm Drain Work Order. Label These Three Things.
A phone clip shows water surrounding a grate. It does not show which grate, where the camera stood or whether the rain had just started or ended. The contractor can see the complaint but still cannot locate it confidently or judge what the sequence represents.
A storm drain complaint video checklist can stay short: label the observation time, camera position and direction, and asset ID. Add one specific question for the contractor to investigate beyond the visible grate. Those details turn a clip into evidence attached to a work order without pretending the camera has diagnosed an underground problem.
Do not create a hazard to collect better evidence
Use existing footage or record only when the location and weather allow a safe observation. Stay out of traffic and floodwater, keep away from open or damaged structures, and do not lift a grate. National Weather Service guidance advises avoiding floodwater and moving to safe shelter when thunder is heard. A maintenance video is never a reason to remain outside during a thunderstorm or approach flowing water.
When safe recording is not possible, submit the location, time and what was observed from a safe place. Report an immediate public-safety problem through the appropriate site or emergency channel rather than delaying action to improve the clip. The work order can identify missing evidence honestly.
Label 1: the observation time, not just the upload time
Record the local date, clock time and time zone for the footage. Keep the original file where practical; messaging apps and exports can make file dates confusing. Distinguish the capture time from the time the work order was created. If the camera clock was wrong or the time is estimated, say so.
Describe the observed rain stage in ordinary words: raining during capture, rain appeared to have stopped, or timing unknown. Do not infer rainfall intensity or the size of the storm from a puddle. If a weather measurement is relevant, identify its actual source and location separately. A nearby gauge and a camera image are different evidence.
Great Lakes Power Vac’s published drainage guidance distinguishes catch basin cleaning from work on connected storm sewer lines. A dated observation helps frame which part of that service discussion is needed: a visible obstruction, material inside a structure, or a question about the route beyond it. The clip itself does not determine the required equipment or authorize a particular treatment.
Label 2: the camera position and the direction it faces
Identify the camera point using a fixed landmark and mark it on the attached plan. “At the east delivery gate, looking west toward inlet N-101” is more repeatable than “near the back.” Specify the direction the camera faces, not an assumed underground flow direction. If compass orientation is unknown, use an unambiguous landmark instead.
Begin with enough context to locate the grate, the standing water and the visible approach route. If conditions permit, hold the view steady so the relationship between those features can be seen. Show a surface flow path only when it is actually visible. Do not call a route “uphill” unless the site information or reliable observation supports that description.
Keep the original sequence when making an annotated copy. Identify any cuts, speed changes or separate clips; otherwise an editor may interpret a jump in the water level as continuous behavior. Avoid capturing identifiable people, license plates or access information that the contractor does not need.
Label 3: the asset ID and its map reference
Use the current drainage asset ID and the plan revision. Include a former ID as an alias if the site recently renumbered structures. Where no identifier exists, assign a temporary observation reference and give a precise location; do not make it look like a verified engineering asset number.
The mock-up below is a fictional 20-second clip storyboard, not actual rain footage or a service report. All times, IDs and observations are illustrative. Each frame retains the same three labels so a still image can be understood on its own.
Clip frame | Observation time | Camera label | Asset / visible observation |
00:00 — context | 2026-10-06 14:12:00 CDT | C-01: east gate; facing west | N-101, map B; water visible beside grate |
00:10 — hold view | 2026-10-06 14:12:10 CDT | C-01 unchanged; facing west | N-101; surface flow visible toward inlet |
00:20 — final frame | 2026-10-06 14:12:20 CDT | C-01 unchanged; facing west | N-101; standing water remains in view |
The example communicates location and sequence without assigning a cause. Water beside N-101 could warrant several different checks. Even a clear view of an uncovered grate does not establish the condition of the outlet or connected pipe.
Give the vendor one question beyond the surface opening
Use this question in the work order: “What condition at the outlet and connected pipe could explain the observed ponding, and what inspection is needed to check it?” The contractor can then identify a suitable investigation, its access needs and any limits. Do not convert the question into an instruction to jet an unconfirmed pipe section.
Great Lakes Power Vac’s drainage comparison guide helps distinguish the inlet, the collection structure and the connected drainage route. Use that vocabulary to describe the requested check. Keep ownership and maintenance boundaries Clear where private drainage connects to another property or a public system.
A concise illustrative request would read: “Investigate ponding beside N-101 using clip RV-01 and drainage plan revision B. Confirm the asset and assess the outlet/connected-pipe question. Report what was inspected, what could not be checked and the recommended scope before additional work is authorized.” Add the site contact, access restrictions and relevant previous service findings separately.
Close the complaint with comparable follow-up evidence
Ask for a completion record naming the asset, work performed, observations, unresolved findings and any checks made under the service conditions. A basin cleanout and a pipe inspection are different entries. Retain “not inspected” where applicable rather than interpreting a completed invoice as proof that the whole route was clear.
If later weather permits a safe follow-up, use the same camera position and labels. Record what changed and what differed about the observation conditions. Do not claim that two storms were equivalent or that one dry image proves the system’s capacity.
Before sending the original clip, pause it on any frame and check whether the recipient can identify when it was recorded, where the camera stood and which asset is shown. Attach the single investigation question. That is enough to make the next technical decision more precise without overstating what the footage can prove.
Comments